About cookies on this site Our websites require some cookies to function properly (required). In addition, other cookies may be used with your consent to analyze site usage, improve the user experience and for advertising. For more information, please review your options. By visiting our website, you agree to our processing of information as described in IBM’sprivacy statement. To provide a smooth navigation, your cookie preferences will be shared across the IBM web domains listed here.
Publication
IEEE Journal of Solid-State Circuits
Paper
An 8x 10-Gb/s source-synchronous I/O system based on high-density silicon carrier interconnects
Abstract
A source synchronous I/O system based on high-density silicon carrier interconnects is introduced. Benefiting from the advantages of advanced silicon packaging technologies, the system uses 50 μm-pitch μC4s to reduce I/O cell size and fine-pitch interconnects on silicon carrier to achieve record-breaking interconnect density. An I/O architecture is introduced with link redundancy such that any link can be taken out of service for periodic recalibration without interrupting data transmission. A timing recovery system using two phase rotators shared across all bits in a receive bus is presented. To demonstrate these concepts, an I/O chipset using this architecture is fabricated in 45 nm SOI CMOS technology. It includes compact DFE-IIR equalization in the receiver, as well as a new all-CMOS phase rotator. The chipset is mounted to a silicon carrier tile via Pb-free SnAg μ C4 solder bumps. Chip-to-chip communication is achieved over ultra-dense interconnects with pitches of between 8 μm and 22 μm. 8 × 10-Gb/s data is received over distances up to 4 cm with a link energy efficiency of 5.3 pJ/bit from 1 V TX and RX power supplies. 8× 9-Gb/s data is recovered from a 6-cm link with 16.3 dB loss at 4.5 GHz with an efficiency of 6.1 pJ/bit. © 2012 IEEE.