About cookies on this site Our websites require some cookies to function properly (required). In addition, other cookies may be used with your consent to analyze site usage, improve the user experience and for advertising. For more information, please review your options. By visiting our website, you agree to our processing of information as described in IBM’sprivacy statement. To provide a smooth navigation, your cookie preferences will be shared across the IBM web domains listed here.
Publication
Ultramicroscopy
Paper
On the preparation of cross-sectional TEM samples using lithographic processing and reactive ion-etching
Abstract
Preparation of cross-sectional TEM samples has been completed without use of the normal means of mechanical polishing and ion-milling. Instead, lithographic processing and reactive ion-etching (RIE) were used to define thin walls ranging from 100 to 1000 nm in width which protruded 1 μm from the substrate surface. The substrate was cut into pieces suitable for securing them into a standard double-tilt holder so that the etched walls were exposed to the electron beam and images could be formed. Samples have been made using both electron beam and optical lithography with different dry etching processes to define thin walls of composite layers of Si, Si3N4 and SiO2 and also a thin film of Al-Cu(2 wt%). The results present a promising new method for preparation of cross-sectional TEM samples that is less labor-intensive and more productive than mechanical polishing and ion-milling. © 1989.