Dynamic data rate and transmit power adjustment in IEEE 802.11 wireless LANs

Abstract

In this paper a novel link adaptation algorithm is proposed that is capable of adjusting the transmit power level and the data rate jointly to the radio channel conditions. The proposed method relies solely on link quality information available at the transmitter by employing the reception or non-reception of the acknowledgment frames as a measure of the channel quality with respect to the power level and data rate. The method is fully compatible with the 802.11 wireless LAN standard. In contrast to many other proposals, it neither relies on the RTS/CTS protocol nor requires a feedback channel to transmit link-quality estimates from the receiver to the transmitter. Different strategies for optimizing the data rate and power level are given. These depend on the scenarios considered, the number of active stations, and the service requirements. The two main strategies are either to drive the system towards the highest possible data rate and adjust the rate and power levels accordingly ("high-performance" mode) or to focus on power saving, possibly trading this for other performance criteria such as throughput or delay performance ("low-power" mode). Other special cases, such as power or rate only adaptation, are also discussed. It can be shown that in most cases the best choice for achieving low transfer times, maximizing throughput, and alleviating the hidden terminal problem is to transmit at the highest possible rates and with high power levels. This "high-performance" mode of operation also minimizes the transmission times, which in turn maximizes the time for putting idling components into a sleep mode, thereby minimizing the overall power consumption. © 2005 Springer Science+Business Media, Inc.